KONVEKTA UL500EM Скачать руководство пользователя страница 13

Страница: 13 / 18

WAKL5N0802A

Edition: 07.02.2022

Page: 13/18

Unscrew the oil filler screw. Suck out the old cooling

machine oil with a suitable pump. Fill in new refrigerant
oil and then mount the oil filler screw.

Make sure you use the right sort of refrigerant oil and a new batch. After the refrigerant
oil has been drained, it must be replaced with new oil immediately. Refrigerant oil is
strongly hygroscopic.

Amount refrigerant oil: 1,3 Liter

Tightening torque: Oil filler screw for refrigerant oil 1/4

“ NPTF: 25 Nm

Evacuate the compressor via the service connections

(1) and (5) at the service shut-off valves HD

– high

pressure - (2) and ND

– low pressure - (6).

Refill the evacuated refrigerant amount. Set service

shut-off valves ND (6) and HD (2) of the refrigerant

compressor in „Original Position“ (turn valve counter-
clockwise until stop). Evacuate manometer and de-
mount.

4. Maintenance work on the electrical installations

4.1. Function check of the condenser fans

Switch on the ignition and start the engine.

Press button and take the air conditioner into operation.

Then check the functioning of the condenser fans.

Danger! Risk of injury!

Take special care near hot, rotating or live parts.

Oil filler screw

Oil sight glass

Condenser fans

Содержание UL500EM



















Результаты поиска

Содержание UL500EM

Отзывы:

Похожие инструкции для UL500EM

Бренды по названию

Популярные бренды

KONVEKTA UL500EM, Инструкция по техническому обслуживанию и ремонту

Результаты поиска

Содержание UL500EM

Отзывы:

Похожие инструкции для UL500EM

Бренды по названию

Популярные бренды