Kontron MSH8900, Руководство пользователя

Страница: 41 / 77

MSH8900
www.symkloud.com // 41
3.2.2.2. Configuring SSH
SSH is enabled by default. To disable SSH access:
Switch Web UI Switch CLI (serial, SSH, SOL)
Configuration > Security > Switch > SSH
Select Disabled
Click Save # configure terminal
(config)# no ip ssh
3.2.2.3. Configuring SNMP
To enable and configure SNMP:
Switch Web UI Switch CLI (serial, SSH, SOL)
Configuration > Security > SNMP > System
Proceed with configuration
Click Save
# configure terminal
(config)# snmp-server ?
A list of possible configuration commands
appears
Proceed with configuration
3.2.3. Accessing the Switch and Configuration Mode
Switch Web UI Switch CLI (serial, SSH, SOL)
To access the Switch Web UI from a web browser:
Enter the IP address configured for the switch
(Table 18) in the URL field of the browser
Press Enter
Log in (default credentials: admin/admin)
To configure the switch:
Click on Configuration to display the configuration
menus
To access the CLI from a serial, SSH or SOL session:
Open a terminal emulator such as PuTTY (serial) or
an SSH connection or an SOL session
Press Enter
Log in (default credentials: admin/admin)
To enter configuration mode:
# configure terminal
(config)#
3.2.4. Managing the Switch Configuration
To save your configuration into non-volatile memory and make your changes permanent:
Switch Web UI Switch CLI (serial, SSH, SOL)
Maintenance > Configuration > Save startup-
config
Click Save Configuration # copy running-configuration startup-config