Kontron MSH8900, Руководство пользователя

Страница: 25 / 77

MSH8900
www.symkloud.com // 25
Table 15: LED status description and button behavior
Hub LEDs
State
ID (blue) Power (green) Status (amber)
Identify command active Blinking
1
Not affected Not affected
Active ShMC with payload (switch) power ON OFF ON
ON: not healthy
OFF: healthy
Standby ShMC with payload (switch) power ON OFF Blinking
2
ON: not healthy
OFF: healthy
Payload (switch) power OFF ON OFF
ON: not healthy
OFF: healthy
Network Link LEDs
State SFP+ (amber or green)
Link established, no activity Green ON
Activity Green blinking 3
Not healthy or configuration error Amber ON
No link, no error OFF
Management LED
State
Link Status/Activity (green) Link Speed (amber or green)
Link established, no activity ON
Green ON: speed 1 Gbps
Amber ON: speed 10 or 100 Mbps
Activity Blinking 3
Green ON: speed 1 Gbps
Amber ON: speed 10 or 100 Mbps
No link OFF OFF
MS2900 power button of hub with an active ShMC
State
Short press Long press (4 seconds)
Power OFF Powers the hub Nothing happens
Power ON Performs a clean shutdown of the hub Turns hub off immediately
NOTE: In a platform with only one hub, nothing will happen when the power button is quickly pressed (short press).
The power button must be pressed for several seconds (long press) for the hub to power OFF. This will result in
complete loss of network access and management capabilities.
MS1300 power button of hub with an active ShMC
State
Short press Long press (4 seconds)
Power ON Nothing happens
4
Nothing happens
4
1 Fast blink, 1 Hz, 50%
2
Slow blink, 0.5 Hz, 20%
3
6 Hz, 50%
4
This button is used in dual-MSH platforms