KTD-N0886-E
Page 102
BIOS - Advanced
KTQM87/mITX Users Guide
Clock 3
Note 1: Use either digit keys to enter value or +/- keys to increase/decrease value by 1.
Do not use mix of digit keys and +/- keys.
Note 2: Use either digit keys to enter value or +/- keys to increase/decrease value by 1.
Do not use mix of digit keys and +/- keys.
Phoenix SecureCore Technology Setup
Advanced
Clock 3
Item Specific Help
BLCK, DMI, PEG, PCIe
PCI33, SATA, USB3
Maximum supported frequency
Minimum supported frequency
Current supported frequency
New Frequency [10KHz]
Supported SSC modes
Current SSC mode
New SSC mode
Maximum supported SSC %
Current SSC %
New SSC spread percent [0.01%]
[100.0 MHz]
[100.0 MHz]
[100.0 MHz]
[10000]
[down]
[down]
[down]
[0.50]
[0.50]
[50]
Frequency in 10KHz increments.
Frequency will be automatically
rounded to nearest valid value.
Allowed range is limited by Max/ Min
supported frequencies. Changes will
not be applied unless’ Apply setting’
is pressed
F1
Help
↑↓
Select Item
+/-
Change Values
F9
Setup Defaults
Esc
Exit
←→
Select Menu
Enter
Select
►
Sub-Menu
F10
Save and Exit
Function
Selection
Description
New Frequency [10KHz] (Note1)
3850-40000
Frequency in 10KHz increments. Frequency will
be automatically rounded to nearest valid
value. Allowed range is limited by Max/ Min
supported frequencies. Changes will not be
applied unless’ Apply setting’ is pressed
New SSC mode
Up
Center
down
Spread Spectrum Clocking mode.
Determines method of clock spectrum
distribution around base frequency. Changes
will not be applied unless ‘Apply Setting’ is
pressed.
New SSC spread percent
[0.01%] (Note2)
0-50
Clock spectrum spread in 0.01% increments.
Determines spectrum deviation away from base
frequency. Allowed range is limited by Max
supported SSC%. Changes will not be applied
unless ‘Apply Setting’ is pressed.
