KTD-N0886-E
Page 9
System Specification
KTQM87/mITX Users Guide
Audio
Audio, 7.1 Channel High Definition Audio Codec using the VIA VT1708S codec
•
Line-in and Line-out
•
Surround output: SIDE, LFE, CEN, BACK and FRONT
•
Microphone: MIC1 and MIC2
•
SPDIF-Out (electrical Interface only)
•
On-board speaker (Electromagnetic Sound Generator like Hycom HY-05LF)
Video
Intel ® i3, i5 & i7 4
rd
Generation Mobile processors support Intel ® HD Graphics 4600.
3x digital display ports via the Intel® Haswell CPU:
•
3x DP (DisplayPorts), comply with DisplayPort 1.2 specification.
•
HDMI panel support via DP to HDMI Adapter Converter.
•
DVI panel support via DP to DVI Adapter Converter.
•
VGA panel support via DP to VGA Adapter Converter.
•
LVDS panel support up to 2 pixel/clock 24 bit colors (VESA and JEIDA)
•
Triple independent pipes for Mirror or Triple independent display support
•
Triple independent pipes for triple independent or cloned displays are supported
from OS. Any 3 displays via DP1, DP2, DP3 and LVDS can be used.
I/O Control
Via ITE IT8516E Embedded Controller via LPC Bus interface
Peripheral
interfaces
•
Four USB 3.0 / USB 2.0 on I/O area
•
Four USB 2.0 ports on internal pinrows
•
Two Serial ports (RS232) on internal pinrows
•
Four Serial ATA-600 (Two further SATA ports implements in mSATA connectors)
•
RAID 0/1/5/10 support
LAN Support
•
1x 10/100/1000Mbits/s LAN (ETHER1) using Intel® Clarksville WGI218LM Gigabit
PHY connected to QM87 supporting AMT 9.0
•
1x 10/100/1000Mbits/s LAN (ETHER2) using Intel®
Pearsonville
I211AT PCI Express
controller
•
PXE Netboot supported.
•
Wake On LAN (WOL) supported
Expansion
Capabilities
•
PCI-Express slots:
•
Slot PCIex16 (Gen 2.0 & 3.0).
Support PEG Bifurcation 1x x16 (default) or 2x x8 or 1x x8 + 2x x4.
•
1x mPCIe/mSATA connector with USB 2.0 port
•
1x mPCIe/mSATA connector w.USB 2.0, support for 3G modem (SIM socket)
•
SMBus, compatible with ACCES BUS and I2C BUS, (via Feature connector)
•
SPI bus routed to SPI connector (BIOS Recovery module interface)
•
DDC/AUX Bus routed to DP connector (Auto detect to DDC when using passive DP to
HDMI or DVI adapters)
•
18 x GPIOs (General Purpose I/Os), (via Feature connector)
•
DAC, ADC, PWM and TIMER (Multiplexed), (via Feature connector)
•
WAKE UP / Interrupt Inputs (Multiplexed), (via Feature connector)
•
3 Wire Bus for GPIO Expansion (up to 152 GPIOs), (via Feature connector)
•
8 bit Timer output, (via Feature connector)