manualshive.com logo in svg

Kontron KTG41/ATXu, Руководство пользователя

Поделиться
Скачать
Kontron KTG41/ATXu Скачать руководство пользователя страница 2

KTD-00781-A  

KTG41 family 

Page 2 of 78 

 

 

www.kontron.com

Document revision history. 

Revision 

Date 

By 

Comment 

 

 

 

 

A 

Nov. 16

th

 2009 

MLA 

Added “mounting the board to chassis”. Correction of RAM PN. 

0 

Sep. 24

th

 2009  JSE/MLA  Initial release 

 

 

Copyright Notice: 

Copyright 

©

 2007, KONTRON Technology A/S, ALL RIGHTS RESERVED. 

 
No part of this document may be reproduced or transmitted in any form or by any means, electronically or 
mechanically, for any purpose, without the express written permission of KONTRON Technology A/S. 
 
 

Trademark Acknowledgement: 

Brand and product names are trademarks or registered trademarks of their respective owners. 
 
 

Disclaimer: 

KONTRON Technology A/S reserves the right to make changes, without notice, to any product, including 
circuits and/or software described or contained in this manual in order to improve design and/or 
performance. 
Specifications listed in this manual are subject to change without notice. KONTRON Technology assumes no 
responsibility or liability for the use of the described product(s), conveys no license or title under any patent, 
copyright, or mask work rights to these products, and makes no representations or warranties that these 
products are free from patent, copyright, or mask work right infringement, unless otherwise specified. 
Applications that are described in this manual are for illustration purposes only. KONTRON Technology A/S 
makes no representation or warranty that such application will be suitable for the specified use without 
further testing or modification. 
 

Содержание KTG41/ATXu















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды