KBox F-300-V1K - User Guide, Rev. 1.0
// 33
5.
Lift the top access cover up.
6.
Now you have access to the internal DDR4 SO-DIMM, SATA, mPCIe and M.2 Key B slots / sockets / connectors
respectively in order to remove or install hardware components.
7.
For closing replace carefully the top access cover to the system and screw it on with the retained screws.
8.
Tighten the retained screws when the cover is firmly in place.
To access M.2 Key M socket
9.
The KBox F-300-V1K should lay on a flat, clean surface with the bottom access cover facing upwards.
10.
Loosen and remove the Phillips screws (four located on the bottom access cover), that secure the bottom access
cover to the chassis. Retain the screws for later use.
Figure 10: Descrewing the bottom access cover
