KBox F-300-V1K - User Guide, Rev. 1.0
// 25
4.3.3.
DP
An external (digital) display can be connected to this DP connector. An active adapter is required in case of a non-DP
display.
4.3.4.
Line-In
The Line-in jack is designed to take input from a higher-powered sound source.
4.3.5.
Line-Out
The stereo headphone jack is used to connect the system‘s audio out signal to amplified speakers or headphones.
4.3.6.
Mic-In
The microphone jack is designed to connect the microphone used for video conferencing, voice narrations, or simple
audio recordings.
4.3.7.
S/PDIF
The S/PDIF output connector is designed to carry digital audio signals out to external speakers or deliver compressed
AC3 signals to an external Dolby digital decoder.
4.3.8.
GbE LAN
These connectors are Gigabit Ethernet 10/100/1000 Mbit/s, IEEE 1588 capable interfaces. The connectors are
standard 8-pin RJ45 type connectors with status LEDs:
Figure 3: Ethernet LED Status
4.3.9.
USB 3.1
The KBox F-300-V1K provides two USB 3.1 / 2.0 interfaces. These connectors allow connection of USB 3.1, USB 3.0 or
USB 2.0 compatible device to the system.
LED status:
Off - Link is down
Flashing Green - Link is up and active
Steady Green - Link is up, no activity
LED status:
Orange - 1000 Mbit/s link established
Green - 100 Mbit/s link established
Off - 10 Mbit/s link established
