![Kontron cPCI-DMXS64GX Скачать руководство пользователя страница 89](http://html1.mh-extra.com/html/kontron/cpci-dmxs64gx/cpci-dmxs64gx_technical-reference-manual_1996273089.webp)
Software Setups
4.7
4.1.6 BIOS Features Setup
Option
BIOS
Defaults
Setup Defaults
Possible
Settings
Description
Virus Warning
Dis.
Dis.
En. / Dis.
When Enabled, you receive a warning message if a program
(specifically, a virus) attempts to write to the boot sector or the
partition table of the hard disk drive. You should then run an anti-
virus program. Keep in mind that this feature protects only the
boot sector, not the entire hard drive.
Note: Many disk diagnostic programs and OS setups (e.g.,
Win95 setup), that access the boot sector table, can trigger
the virus warning message. If you plan to run such a
program, we recommend that you first disable the virus
warning.
Quiet POST
Dis.
Dis.
En./Dis.
At the power on self-test (POST), only the AWARD logo and the
“Press DEL to enter SETUP” message appears.
Quick Power On Self
Test
Dis. En. En./Dis.
Select Enabled to reduce the amount of time required running the
POST. A quick POST skips certain steps. We recommend that
you enable quick POST to save time, since most major OS do
their own tests
Full Screen Logo
Show
Dis. Dis. En./Dis.
When enabled, a full screen bitmap (.BMP) picture will appear
during the POST or you can have your logo being displayed
(contact the Technical Support, see appendix G).
Boot from LAN First
Dis.
Dis.
En./Dis.
If Enabled, the BIOS will first attempt to boot from the LAN. The
complete procedure for this function is available on the “Boot from
LAN” utility diskette.
Raid Card Boot First
Dis.
Dis.
En./Dis.
If Enabled, the BIOS will first attempt to boot from the RAID disk
card.
Boot Sequence
A,C,
SCSI
C,A,
SCSI
A,C,SCSI;
C,A,SCSI;
C,CDROM,A;
CDROM,C,A;
D,A,SCSI;
E,A,SCSI;
F,A,SCSI;
SCSI,A,C;
SCSI,C,A;
C only;
LS/ZIP,C.
This option defines the searching order in the BIOS for the boot
device(s).
Note: The Boot from LAN First and Raid Card Boot First
options take precedence over this option.
Swap Floppy Drive
Dis.
Dis.
En./Dis.
Selecting Enabled assigns physical drive B to logical drive A, and
physical drive A to logical drive B.
Boot Up Floppy Seek
En.
Dis.
En./Dis.
When Enabled, the BIOS tests (seeks) floppy drives to determine
whether they have 40 or 80 tracks. Only 360KB floppy drives have 40
tracks; drives with 720KB, 1.2MB, and 1.44MB capacity all have 80
tracks. Because very few modern PCs have 40 track floppy drives, we
recommend that you set this field to “Disabled” to save time.
Drive A Boot Permit
En.
En.
En./Dis.
When Disabled, this option will not permit booting from Drive A.
Floppy Disk Access
Control
R/W R/W
R/W,
Read Only
When Read Only, this option will not permit writing to the floppy
disk.
Содержание cPCI-DMXS64GX
