Kontron cPCI-DMXS64GX Скачать руководство пользователя страница 29

Страница: 29 / 139

cPCI-DMXS64GX Technical Reference Manual

2.4

2.3.2. CPCI I/O Configuration

Ethernet 1 and 2 signals are available on CPCI I/O connectors only when the board is ordered
for rear access.

◊

CAUTION

The combination of both front and rear panel configurations is not
supported.

The Boot from LAN capability is supported

. To enable the option, use the BIOS Setup

program. Please refer to Section 4.1 BIOS Setup Program.

A diskette entitled

“Network Drivers

for Intel 82559 is included with the cPCI-

DMXS64GX. It contains network drivers for most common operating systems.

2.4.

FLOPPY DISK INTERFACE

The onboard floppy disk controller is IBM PC XT/AT compatible. It handles 3.5” and
5.25”, low and high density disks. Up to two drives can be supported in any combination.

Signal Paths

The Floppy Disk Controller interface is available through the CPCI I/O connector and
through the Mezzanine connector (see section 1.4.1)

Related Jumpers

None.

BIOS Settings

Section 4.1.4 Standard CMOS: Select type of floppy.
Section 4.1.11 Integrated Peripherals: Enable/Disable onboard FDC Controller.

Содержание cPCI-DMXS64GX












































































































































Результаты поиска

Содержание cPCI-DMXS64GX

Отзывы:

Бренды по названию

Популярные бренды

Kontron cPCI-DMXS64GX, Техническое справочное руководство

Результаты поиска

Содержание cPCI-DMXS64GX

Отзывы:

Бренды по названию

Популярные бренды