Kontron cPCI-DMXS64GX, Техническое справочное руководство

Страница: 130 / 139

cPCI-MXS64GX Technical Reference Manual
F-6
POST Codes (continued)
POST
#
Designation Description
0E Test Video Memory 1. If CGA or MONO, test video memory.
2. Beep the speaker.
3. Show the LOGO.
4. Install VT100 driver if necessary.
5. Write sign-on message to screen.
6. Write Copyright message to screen.
7. Write Evaluation message to screen.
8. Show CPU type and speed.
0F Test DMA Controller 0 Test DMA Controller 0.
10 Test DMA Controller 1 Test DMA Controller 1.
11 Test DMA Page Registers Test DMA Page Registers.
12 Reserved Reserved for 8254 Counter 0 - Not implemented.
13 Reserved Reserved for 8254 Counter 1 - Not implemented.
14 Test Timer Counter 2 Test 8254 Timer 0 Counter 2.
15 PIC Test 8259-1 mask bits Verify 8259 Channel 1 masked interrupts by alternately turning off and
on the interrupt lines.
16 PIC Test 8259-2 mask bits Verify 8259 Channel 1 masked interrupts by alternately turning off and
on the interrupt lines.
17 Test Struck 8259's Interrupt Bits Nothing
18 Test 8259 Interrupt functionality Force an interrupt and verify that the interrupt occurred (IRQ 0 - clock
int. 8h).
19 Test Struck NMI Bits (Parity/ IO
check) Nothing.
1A-1E Reserved Reserved
1F Set EISA Mode If EISA non-volatile memory checksum is good, execute EISA
initialization. If no, execute ISA test and clear EISA mode flag. Test
EISA Configuration Memory integrity (checksum & communication
interface).
20-2F Enable Slots 0-15 Initialize slot 0 (System Board) to slot 15.