Kontron CP6016, Руководство пользователя

Страница: 35 / 40

Introduction CP6016
Page 1 - 14 ID 1022-3074, Rev. 2.0
P R E L I M I N A R Y
Software
uEFI BIOS AMI Aptio®, AMI’s next-generation BIOS firmware based on the uEFI Specifi-
cation and the Intel Platform Innovation Framework for EFI.
•
LAN boot capability for diskless systems (standard PXE)
•
Redundant image; automatic fail-safe recovery in case of a damaged
image
•
Non-volatile storage of setting in the SPI Flash (battery only required for
the RTC)
•
Compatibility Support Module (CSM) providing legacy BIOS compatibil-
ity based on AMIBIOS8
•
Command shell for diagnostics and configuration
•
EFI shell commands executable from mass storage device in a Pre-OS
environment (open interface)
•
IPMI support in the command shell
Software IPMI Board Management Controller Firmware providing the following features:
•
The BMC is accessible via two IPMBs and two KCS interfaces with in-
terrupt support
•
The BMC Firmware can be updated in field through all supported inter-
faces using the function “fwum...” of the open-source tool “ipmitool”. For
further information on the ipmitool refer to the sourceforge.net web site.
•
Two BMC Flash banks with automatic roll-back capability in case of an
upgrade firmware failure
•
Board supervision and control extensions such as board reset, power
and SPI Flash control, and boot order configuration
Operating Systems Operating systems supported:
•
Microsoft® Windows® XP with Service Pack 2 or higher
•
Microsoft® Windows® XP Embedded
•
Microsoft® Windows® Server 2003 R2, Service Pack 2
•
Linux®
Table 1-1: CP6016 Main Specifications (Continued)
FEATURES SPECIFICATIONS