D R A F T — F O R I N
T E R N A L U S E O N L Y
59
www.kontron.com
User Guide
CP3004-SA
The power consumption was measured using the following configurations:
»
Workload: uEFI Shell
For this measurement the processor cores were active, the graphics controller was in idle
state (no application running).
»
Workload: Idle
For this measurement all processor cores and the graphics controller were in idle state (no
application running).
»
Workload: Typical
For this measurement all processor cores were operating at maximum workload and the
graphics controller was performing basic operation (e.g. dual-screen output configuration
with no 3D graphics application running). These values represent the power dissipation
reached under realistic, OS-controlled applications with the processor operating at maxi-
mum performance.
»
Workload: Maximum
These values represent the maximum power dissipation achieved through the use of specific
tools to heat up the processor cores and graphics controller. These values are unlikely to be
reached in real applications.
4.3 Power Consumption of CP3004-SA Accessor ies
The following table indicates the power consumption of the CP3004-SA accessories.
Table 42: CP3004-SA Power Consumption
WORKLOAD
Intel® Core™ i7-5700EQ
2.6 GHz
Intel® Core™ i5-4410E
2.9 GHz
Intel® Core™i3-4112E
1.8 GHz
uEFI Shell
22.0 W
19.2 W
13.8 W
Idle
11.8 W
12.7 W
11.7 W
Typical
44.9 W
47.3 W
21.2 W
Maximum
45.0 W
48.0 W
31.9 W
Table 43: Power Consumption of CP3004-SA Accessories
MODULE
POWER CONSUMPTION
DDR3L SDRAM from one to two 18-chip memory modules (JEDEC raw card D)
approx. 5.8 W
SATA Flash module
less than 0.5 W
Gigabit Ethernet (per interface)
less than 0.5 W
