Quick Change Mechanism (QCM)
Box-PC SC-85 – User Manual
49
Phase 1
1.
The mounting is also possible if the cover is fixed at a wall already.
2.
Take the Box-PC with both hands and set the Box-PC over retaining strip of
the cover.
The top frame of the Box-PC must be clear of the retaining strip of
the cover.
Phase 2
1.
The right and left locking tabs of the Box-PC will be positioned over the right
and left centering slots of the cover. The Box-PC will be positioned against
the cover with moderate pressure.
The correct position of the locking tab in the centering slot should be checked.
Phase 3
1.
The Box-PC will be now shifted downward, until the knurled screw of the
Box-PC and the tapped hole of the cover are aligned.
The locking tabs of the Box-PC center themselves to the lower side of the
covers unit centering slots, and the top frame of the Box-PC slides into the
retaining strip of the cover.
2.
Tighten on the knurled screw.
Phase 4
Check the assembly of the Box-PC with the cover.
q
The knurled screw must be firmly tighted.