KT-RFCT 2400A
User Manual – KT-RFCT 2400A
Version: 2.0
21/29
8
Changing the KT-RFCT 2400 firmware using the
Updater APP
This section is only relevant where a user wishes to upgrade or downgrade the firmware
installed on the instrument.
The KT RFCT companion software can be downloaded from:
Link:
ftp://195.95.146.157/RFCT/Releases/
Username: read Password: Access2Files
The software contains instrument drivers, firmware and tools.
The Updater application enables the user to easily update the firmware on the KT-RFCT 2400
and to install or upgrade optional plugins at a later date to provide additional functionality.
8.1.1
Changing Firmware
To access the latest firmware contact Konrad Support
To change the firmware, please perform the following steps:
Run the KT-RFCT 2400A Updater application.
Enter the IP address of the KT-RFCT 2400 (either the primary IP address or the fixed
address 192.168.0.23). Unless previously changed, the primary address is
192.168.1.xxx where xxx is the last 3 digits of the serial number.
When using the Primary IP address the Host PC static IP Address must be changed to
be in the same subnet.
Click the Connect button. The Updater application will connect to the KT-RFCT 2400
and query the current firmware version and installed plugins as shown below:
