KT-RFCT 2400A
User Manual – KT-RFCT 2400A
Version: 2.0
13/29
6.2
Using the Finder APP
Initially to find and set the IP Address of the KT-RFCT 2400A please follow these steps:
On the Host PC disconnect from all other networks
Connect the Ethernet cable from the KT-RFCT 2400A rear panel LAN port to the Host
PC Ethernet port (for optimal performance use Gigabit LAN and a CAT6 cable)
On the Host PC change the IP Address to static IP address 192.168.0.1
If you wish to add the KT-RFCT 2400A to an existing network please contact your
own IT/Network administrator for advice. The KT-RFCT 2400A can be configured to
use a static IP address or a dynamically allocated IP address via DHCP.
Power on the Tester, then wait until the Status LED stops flashing.
Run the KT-RFCT 2400A Finder application
You press Search to cause the application to search the Subnet for the Tester, the default IP
address is 192.168.0.023
