Könner & Söhnen KS 6100HDE, Инструкция

Страница: 12 / 23

www.ks-power.de/en |
11
STARTING TO WORK
9
Do not change the configuration of the amount of fuel or
speed controllers (this adjustment was made before the
sale). Otherwise, there will be possible changes in the
engine work or breakage. Any changes to the design of
the generator will void the warranty service!
Do not let the generator work more than 30 minutes in
range from nominal to maximum.
ATTENTION - DANGER!
ATTENTION - DANGER!
In practice, there are different options for supplying electricity, and different rules
for connecting it. The decision on how to properly connect the equipment in each
individual case must be made by a certified electrician who performs the installation.
The manufacturer is not responsible for incorrect installation, and is not responsible
for any material and physical damage that may result from improper installation or
operation of the equipment.
MAITENANCE PANEL
8
Before starting the engine, make sure that the rated power of power consumers matches with the
power of generator. Do not exceed the nominal power of the generator. Do not connect the device
before starting the engine!
OFF OFF OFF OFF
AC CIRCUIT BREAKER
400V
10A
230V
25A
OIL LEVEL
INDICATOR
12V 8.3A
ENGINE START
400V 16A 230V 32A
VOLTS/FREQUENCY
WORKING /TOTAL HOURS
AC 400V< OFF >AC 230V
OFF ON
T2 T1 Hz V
0
1 2
FUSE
DC 12V 10A
PREHEATER ATS
1 1
2 2
3 3
4 4
5 5
6 6
7 7
8 8 9 9 10 10 11 11
1. 1. LED-display: LED-display:
V - voltage V - voltage
Hz - frequency Hz - frequency
T1 - current time (since the last start) T1 - current time (since the last start)
T2 - total time (since the commissioning) T2 - total time (since the commissioning)
2. 2. Engine start Engine start
3. VTS system single-/three-phase switch 3. VTS system single-/three-phase switch
((position position 1 - 400V, position 0 (OFF) - disabled, 1 - 400V, position 0 (OFF) - disabled,
position position 2 - 230V 2 - 230V))
4. 4. Circuit breaker Circuit breaker
5. 5. Oil level indicator Oil level indicator
6. 6. Grounding Grounding
7. 7. Fuel heater Fuel heater
8. 8. Output for ATS Output for ATS
(except fpr models KS 6100HDE, (except fpr models KS 6100HDE, KS 6 KS 6102HDE, 102HDE,
KS 8100HDE, KS 8100HDE, KS 8102HDE KS 8102HDE ))
9. 9. 12V DC fuse 12V DC fuse
10. 12V DC outlet 10. 12V DC outlet
11.
11. Sockets Sockets