Konig P.SUP.NBT130KN, Руководство пользователя

Страница: 3 / 40

3
POWER UP YOUR USB DEVICE
1. You can connect your USB devices with this power supply by
connecting the USB output (female) port.
2. The DC output from the USB port is 5V at 1A regulated. You may
fi nd the required output current in the USB devices’ user manual.
3. Make sure the total connected load does not exceed the rated
output current of the power supply.
4. Connect the power cord to the power supply fi rst and then insert AC
plug into your wall socket.
5. Switch on your USB devices.
CAUTION
1. Do not short circuit the output terminals.
2. Ensure correct voltage is used as continuous excess voltage could
damage your notebook computer.
3. For DC plug output: Do not try to use this power supply with
appliance requiring more than 8Amp for 12V and 6Amp for 15-20V
and 5Amp for 22V (120 watts max.)
For USB ouput: Do not try to use this power supply with appliance
requiring more than 1Amp for 5V.
4. Do not attempt to open this unit.
5. Remove from mains when not in use.
6. If the supply cord of this power supply is damaged, the power supply
should be returned to the manufacturer or his agent for the cord to
be replaced. This power supply must be earthed.