EN
-7-
(7)
Please UNPLUG the Ethernet Cable of the Wireless IP Camera.
(9) Wait for a few seconds, then the Wireless IP Camera should be linked with the Wireless
Router.
(10) Now you can connect your PC the Wireless Router.
(11) In this case, if your PC’s DHCP Client IP is 192.168.8.101, then the Wireless IP Camera
must be at 192.168.8.100, because the Wireless IP Camera got an IP address earlier than
your PC.
(12) You can now go to the Web-Interface of the Wireless IP Camera.
Safety precautions:
To reduce risk of electric shock, this product should ONLY be opened by an authorized technician
if service is required. Disconnect the product from mains and other equipment if a problem should
occur.
Warranty:
No guarantee or liability can be accepted for any changes and modifi cations of the product or
damage caused due to incorrect use of this product.
General:
Designs and specifi cations are subject to change without notice.
DECLARATION OF CONFIRMITY (for CMP-NWIPCAM30)
We declare under our responsibility that the product;
Brand name: KÖNIG
Model: CMP-NWIPCAM30
Description: 2.4GHz Wireless IP Network Camera
Is in conformity with the following standards;
Radio: EN 300 328 V1.6..1 (2004-11)
EMC: EN 301 489-1 V1.5.1 (2004-11), EN 301 489-17 V1.2.1 (2002-08)
LVD: EN 50371:2002, EN 50392:2004
Following the provisions of the 1999/5/EC R&TTE Directive, in accordance with this regulation
it is allowed to use this product in all European Community & EFTA countries. Nedis BV is not
responsible for the use of this product outside the European Community & EFTA countries.