EN
-6-
6. Wireless Setup Help
Please follow the procedures below if you want to setup the wireless IP camera.
(1) Please check your Router’s wireless settings. It is suggested to use Open System (Disable
security) fi rst.
(2) Please turn on the DHCP Server function of the Router.
(3) Reset the Wireless IP Camera settings to factory defaults by pressing the Reset button for
over 8 seconds.
(4) Please change your PC’s IP address to 192.168.2.xx (in which xx can be any number from
10 to 253), Netmask = 255.255.255.0.
(5) Go to the Web-Confi g WLAN section of the Wireless IP Camera.
Press Refresh button until you fi nd the SSID you want in the list fi rst!
Then select the Connect column of the SSID you want and select the Enable button of
Wireless Connection.
Press the Apply button.
(6) Please go to the LAN section of Web-Confi g.
Select DHCP and press Apply button.
Then close this IE browser window.
