SAFETY NOTES
SET UP INSTRUCTIONS
TECHNICAL DATA
Thank you for choosing this product. The instructions provide directions to all of the important set up and handling steps. We
recommend you keep these instructions for future reference.
KÖNIG & MEYER
GmbH & Co. KG
Kiesweg 2, 97877 Wertheim, www.k-m.de
21302-009-55 Rev.10 03-80-162-00 5/15
- Max centric load 40 kg
- Before and after use check stand for damage.
-
Damaged Stands may not be used.
- Weight distribution must now allow the stand to list to one side
- The floor must be load bearing and even.
- Prior to installation check if the stand, speakers and aids
-
(ladders among other aid) are in working order.
- Ensure use of suitable speakers;
-
i.e. the connection adapters must be equipped with the proper
dimensions and quality.
- Keep unauthorized personnel away from the stand.
-
Protect against risk of tripping or the stand falling over.
- Maintain safety when installing the system:
-
- Ensure the screws are properly tightened.
-
- maximum stability is given when the base struts of the stand
- -
are level.
- The crank button must be in the correct position
- -
(has clicked into place) unless the crank is being used to
- -
extend or retract the tube.
- ENSURE: moving a stand with the speakers attached can
-
result in damaging the stand's base.
- Careful and attentive handling is required when adjusting the stand
-
due to the possibility of pinching or wedging your hand.
21302 Speaker Stand
- Load Bearing Weight: 40 kg TÜV-Certified Construction Type
- High quality stand for professional use: safe, stable and easy to use
- Similarly adapted for home, property, public area
- Height: min. 1425 / max. 2230 mm, Base Circumference 1150 mm, Extension Rod ø 35 mm, Weight: 8.2 kg
Material
Tubes, struts, bolts - Steel
Housing - Zinc-die cast
Brackets - PA
End caps, shock absorbers - TPE
Bearing load
max. 40 kg central load
Dimension
max. base circle ø 1150 mm
Height: 1425 - 2230 mm (at max base circle)
Extension tube: ø 35 mm with M10 socket
Folded size, kg
1180 x 195 x 125 mm, 8.2 kg
Box, kg
1185 x 165 x 125 mm, 9.1 kg
Accessories
(optional)
Carrying case 21311 (for one or two 213)
K&M flange adapter e.g. 19580, 19654,
19656 etc.
Screw-on Adapter (24281)
Adapter Sleeve 21326 ø 38 mm (=US-Variant)
Traverse 213/9
Setting up the 21302 Speaker Stand is very easy.
With the exception of two clamp screws
1
the stand comes pre-
assembled.
All that needs to be done is to place the stand in position.
(1) Screw in both clamp screws loosely
(2) Loosen the clamping screw of the triangular clamp/bracket a bit.
(3) Expand the legs until...
(4) ...the connecting struts are horizontal.
(5) Re-tighten the clamping screw.
(5)
NOTE:
(5)
Manual strength is sufficient; avoid over tightening,
(5)
it places undue stress on the components.
