PLACEMENT and EXTENSION of the SPEAKER
NOTE:
The crank system is used for easy extension and retraction of the speaker.
However, do not underestimate the weight of the speakers (max. 40 kg), which must be placed on the stand tube, i.e.: knowledgeable
and physically fit individuals are needed, depending on the load weight – this can require 2 - 3 individuals.
CHECK, MAINTENANCE, CLEANING
MOVING THE LOAD
In contrast to other stands one
individual is able to move the
speaker to the desired height
easily using the crank system.
SEQUENCE WHEN
EXTENDING AND
RETRACTING THE SPEAKER
(6)
Loosen the
clamp screw
(7)
Turn the crank and keep the
button pushed while turning the
crank handle
(8)
As soon as the desired
height has been reached
release the button and
and let it click into
place - in some cases
a half of a turn of the
crank is still required
(9)
Tighten the clamp
screw
Application Examples (not included in the delivery)
- Careful use of the stand maintains the use of the telescope and the load bearing functionality of the stand, as well as the safety of the installation
- Perform workstation maintenance only without the speakers attached and watch for possible risks (pinched hands/fingers, impact or
-
the stand falls over)
- To care for the product use a damp cloth and a non-abrasive cleaning agent
FAULT-FINDING (F) and REMEDY (R)
F: Stand is not stable:
F:
R: Ensure that the surface is even.
F:
R: Ensure that the base is expanded to it full extended position and tighten the clamp screw.
F: The extension tube is loose i.e. retracts when the speakers are attached:
F:
R: Check if the button on the crank is in the correct position (has clicked into place) and tighten the clamp screw.
