DPU
Series
E-18
■
Setting Mode 2
Set alarm value for overcurrent.
• Set range : 0 to 120%
Select alarm value for overvoltage.
• Set range : 0 to 120% for 1-phase model, 0 to 300% for 3-phase
Set alarm delay time for overcurrent.
• Set range : 0 to 100sec
Set alarm delay time for overvoltage.
• Set range : 0 to 100sec
Set alarm value for heater break.
• Set range : 10 to 500%
Select heater break alarm channel.
Select overcurrent, current alarm channel.
Select each alarm channel.
OP
ST-2
ST-1
HEAT
120
OC-V
P
SCR
HB-V
OC-T
HB-A
OC-A
C-AL
OV-V
OV-T
OV-A
FUSE
Operating Mode
Setting Mode 2
Setting Mode 1
Overcurrent
alarm value
Element error
alarm CH
Heat sink overheating
alarm CH
Fuse break alarm CH
Overvoltage alarm CH
Overvoltage delay time
Overvoltage
alarm value
Current alarm CH
Overcurrent alarm CH
Overcurrent
delay time
Heater break
alarm value
Heater break
alarm CH
AL2
AL1
NON
AL2
AL1
NON
AL2
AL1
NON
※
1
Displays setting mode 2.
RUN
mode
Press
key
for 3 sec.
※
1.
P
: Press any key among , .
※
If there is no operation any keys in 30sec., it returns to RUN mode.
※
Press the
key when entering
ST-2
setting mode in any parameters, it moves to
ST-2
.
Press the
key once more, it returns to RUN mode.
※
When setting [
LOCK
] as
LOC2
or
LOC3
, and entering
ST-2
, it displays only [
LOCK
] parameter.
