background image

MEDICAL FILM PROCESSOR Model SRX-101A

TABLE OF CONTENTS

PREFACE  • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •1

PRECAUTIONS  • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •2

CAUTION LABELS  • • • • • • • • • • • • • • • • • • • • • • • • • • • • •3

NAME OF PARTS  • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •5

1. Main Unit(Front View)  • • • • • • • • • • • • • • • • • • • • • • • • •5
2. Main Unit(Left Side View) • • • • • • • • • • • • • • • • • • • • • • •5
3. Main Unit(Rear View)  • • • • • • • • • • • • • • • • • • • • • • • • •6
4. Control Panel  • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •6
5. Main Unit(Top View)  • • • • • • • • • • • • • • • • • • • • • • • • • •7

OPERATING PROCEDURES  • • • • • • • • • • • • • • • • • • • • • •8

1. Film Processing  • • • • • • • • • • • • • • • • • • • • • • • • • • • • •8
2. Inserting Cleaning Film  • • • • • • • • • • • • • • • • • • • • • • • •9
3. Inserting Exposed Film  • • • • • • • • • • • • • • • • • • • • • • •11
4. Shutting Down  • • • • • • • • • • • • • • • • • • • • • • • • • • • • •13
5. Chemical Mixing, Replacing and Replenishing  • • • • • • •14
6. Responding to Power Failure  • • • • • • • • • • • • • • • • • • •16
7. Maintenance when Long Periods of No Operation  • • • • •16
8. Changing Processing Conditions  • • • • • • • • • • • • • • • •16
9. RUN  and READY Lamps ON-OFF Patterns  • • • • • • • •17

TROUBLE  SHOOTING  • • • • • • • • • • • • • • • • • • • • • • • • •18

1. Motor Error and Temperature Error  • • • • • • • • • • • • • • •18
2. Trouble Check List  • • • • • • • • • • • • • • • • • • • • • • • • • •19

SERVICE  AND  MAINTENANCE   • • • • • • • • • • • • • • • • • •22

1. Monthly Service and Maintenance • • • • • • • • • • • • • • • •22
2. Quarterly Service and Maintenance • • • • • • • • • • • • • • •25
3. Semiannual Service and Maintenance  • • • • • • • • • • • • •26
4. Annual Service and Maintenance  • • • • • • • • • • • • • • • •26
5. Service and Maintenance Schedule • • • • • • • • • • • • • • •27
6. How to Use Splash Guard  • • • • • • • • • • • • • • • • • • • • •27

SPECIFICATIONS  • • • • • • • • • • • • • • • • • • • • • • • • • • • • •28

SHUT OFF WATER VALVE,

WHEN TURNING OFF THE PROCESSOR.

WARNING:

This equipment has been tested and found

to comply with the limits for a Class A digital

device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide

reasonable protection against harmful

interference when the equipment is operated

in a commercial environment. 

This equipment generates, uses, and can

radiate radio frequency energy and, if not

installed and used in accordance with the

instruction manual, may cause harmful

interference to radio communications.

Operation of this equipment in a residential

area is likely to cause harmful interference in

which case the user will be required to

correct the interference at his own expense.

Don't operate the SRX-101A before recognizing the significance of the PRECAUTIONS and the
CAUTION LABELS.

IMPORTANT

Содержание SRX-101A
































Отзывы: