E-5
17. Remove the left and the right adjustment roller
lock nuts (two lock nuts each for front and rear).
18. Turn the left side adjustment roller’s (front and
rear) screws counterclockwise to make the level
where the adjustment rollers are fixed as high as
possible.
19. By turning the right side adjustment roller screws
(front and rear) counterclockwise, the overall
length of the right adjustment roller legs is short-
ened and therefore the right side of the unit is
lowered. Until the gap (3.0mm ± 2.0mm) is
ensured between the main unit and the large
capacity unit, make the height adjustment of the
large capacity unit.
20. After the height adjustment, turn the screws so
that the left side adjustment rollers (front and
rear), which have been off from the floor after
step 18, sit on the floor.
A0TJIXC014DA
A0TJIXC015DA
A0TJIXC016DA
A0TJIXC017DA