E-2
II. Installation procedures
1. Turn off the machine and unplug the power cord
from the power outlet.
2. Remove the protective tape and shipping preser-
vatives and remove the protective vinyl bag of the
hookup cord.
3. Remove the three covers and the sheet from the
right side of the main unit.
4. Install the mounting bracket C furnished with the
unit onto the two places (two screws for each
bracket).
5. Install the mounting bracket A onto the rail. Both
parts are furnished with the unit.
6. Fit the tab of the mounting bracket A onto the
groove on the ceiling of the compartment as
shown in the picture then slide the mounting
bracket A to the rear until the rail is fixed in the
main unit.
Note:
After checking that the rail is secured in the correct
position, install the rail with the screws furnished
with the unit (four screws).
A0TJIXC001DB
A0TJIXC002DB
A0TJIXC003DA
A0TJIXC004DB
A0TJIXC028DA
Groove
Tab
A0TJIXC005DB