Konica Minolta KIP 7700, Руководство пользователя

Страница: 22 / 67

Chapter 1 Before Use 1-13
1. 7. 4 Environmental Condition - Correction
Take a necessary treatment according to the environmental condition as shown below.
Humidity(%)
Possible problem
Necessary treatment
“Void of image”, “crease of paper” and
other problems occurs when you print
with plain paper and vellum.
1. Install the humidifier in the room, and
humidify the room air.
2. Remove the media from the machine
right after the completion of print, and
keep it in a plastic bag.
“Void of image” occurs when you print
with vellum.
If you will not make print soon, remove
the vellum from the machine and keep it
in a plastic bag.
Remove the paper from the machine after
everyday use, and keep it in a plastic bag.
“Void of image” occurs when you print
with plain paper and vellum. If you will not make print soon, remove
the media from the machine and keep it in
a plastic bag.
Low
40%
70%
High
“Void of image”, “crease of paper” and
other problems occurs when you print
with plain paper and vellum. 1. Turn on the Dehumidify Heater.
2. Remove the media from the machine
right after the completion of print, and
keep it in a plastic bag.
NOTE
(1) KIP 7700 is equipped with the Dehumidify Heater.
Using it in high humidity environment (65% or higher) is recommended.
Refer to [2.7 Dehumidifying Roll Media] on page 2-19.
(2) “Void of image” and “crease of paper” will occur in case of extremely high or low humidity.
(continued on the next page)
Normal Print
Normal Print
If the media is humidified;
If the media is humidified;
Crease of paper
Loss of image