Konica Minolta KD-25, Руководство пользователя

Страница: 10 / 37

18 19
Preparation For Taking Pictures
1. Switch off the camera.
2. Open the Battery / Memory Card
Cover.
3. Insert the SD card into the card
slot and press it down until you
hear a click sound.
4. Close the Battery / Memory Card
Cover.
Note
If a new SD card is used, you'll have to format it first.
Please refer to page
for details.
Note
This camera is equipped with a built-in flash memory. The image(s)
can be stored either in the built-in memory or in a memory card.
Please note that if a memory card is not inserted, all operations will
affect only the built-in flash memory. All images will be stored onto
the memory card rather than the built-in flash memory.
Removing An SD Card
1. Make sure the camera is switched off.
2. Open the Battery / Memory Card Cover.
3. Press down the SD card and the card will jump up.
4. Take out the card and close the Battery / Memory Card Cover.
18
Inserting An SD Card
Note
This camera comes with approximately 8 MB of memory installed,
but if you would like to use additional memory, the following
cards are compatible:
SD Memory Card
About the SD Memory Card
Caution
SD Memory Cards are manufactured using precision electronic
components. Do not perform the following as malfunction or
damage may occur as a result.
Do not touch the terminals with hands or metal objects. Damage
to the components may occur as a result of static electricity.
Before handling an SD Memory Card, discharge any static
build-up from your body by touching grounded metal, etc.
Do not bend, drop or apply excessive force.
Avoid heat, liquid and direct sunlight when using and for storage.
Do not open the battery/card cover or remove the SD Memory
Card while data is being read or written.
Do not dismantle or modify.
* The SD logo is a trademark.
Preparation For Taking Pictures