Konica Minolta inpro, Техническое руководство

Страница: 31 / 43

Software configuration settings
Version 2.0.1 - 26
Multi tag:
Setting Description Value Card Types Behaviour
Setting 1
IP reader will read the
following protocols:
EM4x02, EM4x05,
EM4x50, hitag1, hitag2, Q5
and Ti-RFID.
Because of the emulation
of the EM4x02 card and
the EM4x05 card by the Q5
card, these different
settings of Setting 1 are
supported.
0
EM4x50, hitag1,
hitag2, Q5 and
Ti-RFID
-
1 EM4x02, EM4x05,
EM4x50, hitag1,
hitag2 and Ti-RFID -
3 EM4x02, EM4x05,
EM4x50, hitag1,
hitag2 and Ti-RFID The card data of the
EM4x02 cards will be
processed and send in
reversed order.
5 EM4x02, EM4x05,
EM4x50, hitag1,
hitag2 and Ti-RFID The card data of the
EM4x05 cards will be
processed and send in
reversed order.
7 EM4x02, EM4x05,
EM4x50, hitag1,
hitag2 and Ti-RFID The card data of the
EM4x02 and EM4x05
cards will be processed
and send in reversed
order.
Setting 2 Not applicable - - -
Setting 3 Not applicable - - -
Data 1 Not applicable - - -
Data 2 Not applicable - - -
Warning: Processing and sending of data in reversed order not
tested for the EM4x05 cards.
Mifare:
Setting Description Value Card Types
Setting 1
The Mifare reader supports the 4 bytes
Mifare card serial number and 7 bytes
Desfire card serial number.
Setting 1 will be used to determine if
the order of the 4 bytes Mifare card
serial number should be reversed.
Only 4 bytes of the Desfire card serial
number are used to calculate the
decimal card number.
0
Card serial number
is calculated from
the raw data in the
reversed order.
1
Card serial number
is calculated from
the raw data in the
normal order.
Setting 2 Not applicable - -
Setting 3 Not applicable - -
Data 1 Not applicable - -
Data 2 Not applicable - -