Konica Minolta inpro, Техническое руководство

Страница: 7 / 43

Introduction
Version 2.0.1 - 2
Introduction
In this manual you find the instructions to install and configure your
IP-reader. This manual is meant for all the Konica Minolta
IP-readers.
This manual, the IP reader hardware and software are subject to
change, make sure you have the latest version of this manual,
because the older versions may have become obsolete.
Konica Minolta IP-readers:
·
361100 Inepro IP Card Reader Mifare KoMi
· 361101 Inepro IP Card Reader Mifare Desfire KoMi
· 361102 Inepro IP Card Reader Legic Prime KoMi
· 361103 Inepro IP Card Reader Legic Advant KoMi
· 361104 Inepro IP Card Reader HiD iClass KoMi
·
361105 Inepro IP Card Reader HiD Prox KoMi
·
361106 Inepro IP Card Reader HiD Indala KoMi
· 361107 Inepro IP Card Reader Multitag KoMi
Function
The purpose of the IP reader is to read the unique ID contained in
the card that is presented to the reader and transfer this ID to a
server. In most cases this data will be the card serial number. To
facilitate this a variety of card reader software module have been
developed. Our configuration tool will enable you to change the
setting on the IP reader board.