Konica Minolta Fujitsu fi-6800, Руководство по эксплуатации, Страница: 116 / 243

Index
Chapter 5 Various Ways to Scan
Appendix
Glossary
Introduction
Contents
TOP
116
How to Load
Documents
Daily Care
Troubleshooting
Operational
Settings
Replacing
Consumables
Scanner
Overview
Various Ways
to Scan
Configuring
the Scan
Settings
How to Use
the Operator
Panel
Operational procedure
1
After a multifeed error occurs, either press the [Eject]
button to eject the document from the paper path, or open
the ADF to remove the document.
When the document is removed, the display on the operator panel
LCD changes as follows:
*1: When the paper separation force is set to [ „„„„„ ] which is the
maximum level, the part of the message “When [Ready] is displayed,
increase the paper separation force by using the [
U
] button to suppress
multifeeds.” does not appear.
2
Place the removed document back on the hopper.
If a multifeed error is detected while no paper is attached on the
document, press the [Scan] button or restart scanning via the
computer (do not press the [iMFF] button). If there is a paper
attachment on the ejected sheet and the attachment is likely to be the
cause of the multifeed error, then proceed to the next step.
Upon multifeed Upon ejecting
document
Multifeed detected (Overlap)
Press the iMFF button to eject the document and
to suppress multifeed detection from next scans.
Press the Eject button just to eject the document.
When [Ready] is displayed, increase the paper
separation force by using the [
U
] button to
suppress multifeeds. (*1)
[Ready
(Multifeed)]
screen
Multifeed detected (Overlap)
Press the Eject button to eject the document.
When [Ready] is displayed, increase the paper
separation force by using the [
U
] button to
suppress multifeeds. (*1)
Multifeed detected (Overlap)
Press the iMFF button to memorize the multifeed
pattern and eject the document. Press the Eject
button to eject the document.
When [Ready] is displayed, increase the paper
separation force by using the [
U
] button to
suppress multifeeds. (*1)
Multifeed detected (Overlap)
Press the iMFF button to memorize the multifeed
pattern. Press the Eject button to eject the
document.
When [Ready] is displayed, increase the paper
separation force by using the [
U
] button to
suppress multifeeds. (*1)
Multifeed detected (Length)
Press the Eject button to eject the document. [Ready] screen
If you click the [OK] button in the window that shows the
multifeed image, step
2 is not required because the scanner
feeds the multifeed image and continues the scan.
Function
/Enter
Check
Menu
Scan
Stop
Eject
Counter
Reset iMFF
Send to
/Pause
Clear
/Back
LCD
[Scan] Button
[Eject] Button
[iMFF] Button