E-8
7. Install the reinforcing plate/R (included in the RU
package) on the back of machine installation plate/
R and machine installation plate/L (TP screw
M4x6: 4 pcs.: included with the RU).
8. Retract the supporting leg on the back side of the
power supply unit.
9. Connect the four FS-503 connector jacks to the
connector plugs of the power supply unit.
10. Place the conveyance unit on the rail of machine
installation plate/R and machine installation plate/
L, and slide it all the way in until it stops at the
back.
11.Remove the lock shaft of the conveyance unit.
(1 black screw).
Note:
When removing conveyance unit, being to use the
lock shaft, keep.
12. Pull out the conveyance unit, secure it with
screws [TP screw (black) 3x8: 2pcs.: included
with the RU], and push it back.
15AQIXE050SA
TP screw M4x
6
TP screw
M4x
6
R
einforcing
plate/
R
15AQIXC008SA
15AEIXE043SA
FS-503 connector
15AQIXE05
2
SA
Conveyance unit
Machine installation
plate/
R
Machine
installation
plate/L
Machine
Option
Lock shaft
15AQIXE053SA
15AQIXE054SA
TP screw M3x8
Option side
Machine side
