E-3
2. Remove the locking tapes from each guide plate,
and remove the locking materials (4 places).
3. Pull out the stacker and remove the locking tapes.
Remove the locking materials (2 pieces) within the
stacker.
4. Remove the cushions and locking guide tapes
from the stapling portion.
V. Installation Procedure
1. Turn OFF the machine’s Sub and Main switches,
and unplug the power cord.
2. Install the Installation plate/1 (2 places), the
Installation plate/2, and the Installation plate/3 on
the left side of the machine as below. (TP screw
M4x6: 2 pcs. each x 4 places)
Note:
For the Installation plate/2 and the Installation
plate/3, use the screw holes with the engraved
marking “FS503.”
Locking tapes
Locking
materials
15AEIXE004SA
Locking tapes
Locking materials
Locking tapes
Locking guide tape
15AEIXE005SA
Installation procedure for
[FS-503+ MFP 105ppm series]
Cushions
Locking
guide tapes
15AEIXE00
6
SA
Installation plate/1
Installation plate/
2
Installation plate/3
Engraved marking FS503
Engraved marking FS503
15AEIXE007SA
