E-3
(10) Connect the USB cable removed in step (9) to
the local interface board unit.
(11) Attach the Local interface board unit to the
main body. (One supplied screw and two
screws removed in step (9))
Note:
Be careful not to pinch the harness.
(12) Connect the harness connector to the main
body relay connector and route the harness
inside the wire saddle.
(13) To install the covers, connector, and others
removed in steps (2) to (7), reverse the removal
procedure.
(14) Affix the label furnished with the local interface
kit to the position shown below.
*
The installation procedure for models C368/
C308 is complete.
Label