Konica Minolta DP-85, Руководство по эксплуатации

Страница: 34 / 62

- 32 -
Output Modes
Staple-Sort Mode Using Primary (Main) Tray
Use this mode when you want to offset and staple each printed set. Stapling position and
number of staples (1 or 2) can be designated.
Each finished set will be offset from the next printed set.
With the Primary (main) tray initially selected, FS-111/211 outputs the printed sheets FACE
DOWN in the proper order.
❒
Stapled paper at 1 position: A3, B4, F4, A4R, A4, B5, B5R, A5
❒
Stapled paper at 2 positions: A3, B4, F4, A4R, A4, B5, B5R, A5
* A3, B4, and F4 paper cannot be stapled at 2 positions in the long
edge.
❒
Paper capacity for 80 g/m
2
paper: 1,000 sheets (Variable according to the number of pages to be
stapled.)
❒
Staple capacity: 50 sheets 80 g/m
2
paper (5.0 mm thick or less)
(Staple capacity is changeable, and may be set to 45, 40, or 35 by your service
representative.)
❒
Staple position: 1 oblique staple*; 2 parallel staples
*: Oblique staple may change to parallel staple when using some print sizes.
NOTE: Using excessively curled paper or some types of thin paper in Staple-sort mode may cause poor results in
arrangement of the stapled sets.
3
2
3
2
1
3
2
1
3
2
3
1
3
2
1
1 oblique staple 2 parallel staples
DP85v1.book Page 32 Wednesday, February 12, 2003 4:09 PM