Konica Minolta DP-85 Скачать руководство пользователя

Страница: 44 / 62

Loading Paper (continued)

- 42 -

Maintenance & Supplies

Loading Paper in Tray 1, 2 and 3

When Thick or Thin is displayed on the tray key of the Basic Screen, be sure to load the
specified paper; otherwise mishandled paper may occur.
When TAB is displayed on the tray key of the Basic Screen, see p. 45.

1 Withdraw tray 1, 2 or 3, and open the paper feed roller.
2 Place paper on the tray with the curl side turning up.

Load size A3, B4, F4, A4, A4R, B5, B5R, A5 (user-adjustable)
Do not stack paper above the thick red line.

3 Move the green levers (located at the front and left side) to the edge of the paper.

NOTES: • Be sure that the rear guide plate is securely aligned to the paper; otherwise the machine trouble may occur.

• Be sure that the green levers are securely aligned to the paper; otherwise the machine cannot detect the

correct paper size, or prints may not be punched in position.

4 When paper is seated properly, close the paper feed roller.
5 Push the tray back fully into the printer.

NOTE: Do not bump the tray into the main body; otherwise machine trouble may be caused.

DP85v1.book Page 42 Wednesday, February 12, 2003 4:09 PM

Содержание DP-85































































Результаты поиска

Содержание DP-85

Отзывы:

Похожие инструкции для DP-85

Бренды по названию

Популярные бренды

Konica Minolta DP-85, Руководство по эксплуатации

Результаты поиска

Содержание DP-85

Отзывы:

Похожие инструкции для DP-85

Бренды по названию

Популярные бренды