Konica Minolta DiMAGE G400, Руководство пользователя

Страница: 115 / 139

115
Using the Set-up Menu
(Cont’d)
Resetting the file number
- The setting method of file numbers can be changed.
* NUMBER RESET OFF (default setting)
Consecutive file numbers are assigned as shown below. (The file numbers are
continued if a new card is inserted.)
XXXX1.jpg, XXXX2.jpg, XXXX3.jpg…
* NUMBER RESET ON
Each time a new card is inserted, numbers are assigned starting from XXXX1.jpg. If
a card that already contains images is inserted, the assigned file numbers continue
on from the existing numbers already on the card.
Changing Auto-Exposure (AE) Modes
- Your camera uses center-weighted metering as the default, but it can be
changed to spot metering.
- Spot metering is used to ensure matching the exposure to a targeted part
of your subject.
* Center-weighted metering (AE CENTER)
In this mode the camera sets the exposure according to the metering for the central
part of the whole frame. It is ideal for taking photos where the brightness of the
subject in the center of the frame is desired.
* Spot metering (AE SPOT)
In spot metering the camera measures the light of just the subject in the center of the
frame, and sets the exposure to it. This mode is ideal when the background of the
picture is brighter than the subject, or there is a great deal of contrast between the
two, as the camera allows you to take the photo with the exposure set to the brightness
of your desired subject.