Konica Minolta bizhub C35, Руководство по обслуживанию

Страница: 238 / 330

DRAFT
Field Service V er. 1.0 Feb. 2010 12. JAM DISPLAY
199
bizhub C35
TROUBLESHOOTING
12.3.10 Misfeed at ADF section
A. Detection timing
B. Action
Type Description
Detection of
misfeed at ADF
section
• The original does not block the paper interval sensor (PS103) even after the
lapse of a given period of time after the original feed is started.
• The original does not block the registration sensor (REYB100) even after the
lapse of a given period of time after the original blocks the paper interval sensor
(PS103).
• The duration between the original’s blocking and unblocking of the paper inter-
val sensor (PS103) is shorter than a given period of time.
• When the preceding page of the original blocks and then unblocks the registra-
tion sensor (REYB1009), the subsequent page of the original does not block
the paper interval sensor (PS103).
• The original does not block the registration sensor (REYB100) even after the
lapse of a given period of time after the original is fed again.
• The original does not block the before read sensor (REYB101) even after the
lapse of a given period of time after the original blocked the registration sensor
(REYB100).
• The original blocks the before read sensor (REYB101) longer than a given
period of time.
Detection of paper
left in ADF section • When the power switch is turned ON, the registration sensor (REYB100),
before read sensor (REYB101), or paper interval sensor (PS103) is blocked.
Relevant electrical parts
Registration sensor (REYB100)
Before read sensor (REYB101)
Paper interval sensor (PS103) DF control board (DFCB)
MFP board (MFPB)
Step Action
WIRING DIAGRAM
Control signal
Location (electri-
cal component)
1 Initial check items - -
2 Check the connectors on the DFCB for
proper connection and correct as neces-
sary. - -
3 Change MFPB. - -
4 Change ADF. - -