Konica Minolta BIZHUB C250 Скачать руководство пользователя страница 331

Страница: 331 / 600

Copy paper/original documents

7-14

C250

igin

nts

Chapter 7

Touch [Custom Size].

The Custom Size screen appears.

Type in the length (X) and width (Y) of the paper.

–

Make sure that [X] is selected, and then use the keypad to type in
the length of side X. (139.7 mm to 457.2 mm)

–

Touch [Y] to select it, and then use the keypad to type in the length
of side Y. (90.0 mm to 311.1 mm)

–

If a value outside of the allowable range is specified, the message
“Input Error” appears. Type in a value within the allowable range.

–

If the value was incorrectly entered, press the [C] (clear) key in the
keypad to erase the value, and then specify the correct value.

Can paper sizes be stored?

Five non-standard paper sizes can be stored.

To recall a stored paper size, touch the corresponding memory key.

The names “memory1” through “memory5” can be changed. For
details on changing the names, refer to “To store a non-standard
paper size (Custom Size settings)” on page 7-15.

For details on storing paper sizes, refer to “To store a non-standard
paper size (Custom Size settings)” on page 7-15.

Touch [OK], and then touch [OK] in the next two screens that appear.

The Basic screen appears again.

c250.book Page 14 Tuesday, April 4, 2006 11:33 AM

Содержание BIZHUB C250
























































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание BIZHUB C250

Отзывы:

Бренды по названию

Популярные бренды

Konica Minolta BIZHUB C250, Руководство пользователя

Результаты поиска

Содержание BIZHUB C250

Отзывы:

Бренды по названию

Популярные бренды