bizhub 4752/4052
H SERVICE MODE > 3. Setting procedure
H-3
3. Setting procedure
1.
Press the key corresponding to the function you would like to change the setting for. Keys or setting screens will appear for each function.
Ex.: System 1
1.
Press the key for the item that you would like to change the setting for. Setting screens will appear for each item.
Ex.: Install Date
2.
Press the key for the setting you would like to change. You can also input the numerical value using the 10-key pad. (the [+]/[-] keys can
also be used for settings. Follow the directions on the screen to input numerical values.)
NOTE
▪ For more details, see the description pages for each setting item.
3.
Touch [END]. This closes the setting screen and returns to the Service Mode screen. (If deep within the hierarchy of the setting screen, it
may be necessary to touch [END] several times)
4.
Touch [Exit]. This will close the Service Mode screen and exit the Service Mode.
5.
Turn OFF the main power switch. After waiting 10 seconds, turn ON the main power switch again. Turning the main power switch OFF and
then ON again makes the changes to the Service Mode setting take effect.
NOTE
▪ Simply exiting the Service Mode will not make the changed settings take effect. You must turn the main power switch OFF
and then ON again.
