Konica Minolta 0862, Руководство по эксплуатации, Страница: 67 / 200

Ch.3 Sequence of Examination
< 65 >
REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2
6
When the “Marker” or “Stamp” is selected, touch the
position where the Marker or Stamp should be allo-
cated.
• Marker or Stamp will move to the selected position.
8
Touch the [OK] button of the order in which the
[Marker], [Stamp] or [Grid/Scale] has been allocated.
• Output of the image starts, and small icons indicat-
ing the printer and host will be displayed at the
upper left of the image display field.
• Upon completion of output to each device, the
icons will disappear.
• Selected “Marker”, “Stamp” or “Grid/Scale” will be
allocated and film will be printed.
7
Touch the [OK] Button.
• Returns to the “Exam Check” screen.
5
Touch the [Marker], [Stamp] or [Grid/Scale] that
should be allocated on the film.
• Selected “Marker”, “Stamp” or “Grid/Scale” will be
registered, and returns to the “Detailed Data
Setting” (Overlay) screen.
• Selected “Marker”, “Stamp” or “Grid/Scale” will be
displayed in the image display field.
Destination printer
name will be displayed
at the upper left of
“Marker1 Select”,
“Marker2 Select”,
“Stamp Select” and
“Grid/Scale Select”
screen.
Overlay allocation described in the above can also be applied to the scanned
images in the “Exam History” screen.
However, when there are multiple printers are connected t to the CS-3, print out of
the order selecting the overlay position is only capable from one printer. The name
of the printer from which the order can be printed with the overlay position selected
will be displayed at the upper left of each screen, that is “Marker1 Select”, “Marker2
Select”, “Stamp Select” and “Grid/Scale Select” screen. When a reprint is required,
always select the printer selected here.
5
6
6
6
6
7
8