Konica Minolta 0862 Скачать руководство пользователя страница 124

Страница: 124 / 200

Ch.4 Description of Screens

< 122 >

REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2

Enables selection of the scale or grid overlaid on the image.

Scale/Grid Selection Screen

Scale/Grid List

A list of scale and grid available for output is displayed in button format.
Touch the button corresponding to the required scale or grid.

• If the [OFF] button is selected, the scale/grid will not be output.

• The scale/grid selection screen is closed.

Scale/Grid

Selection Screen

Detailed Data

Setting Screen

(Overlay)

Scale 1

• A scale overlay is output

around the image at 5mm

intervals.

Scale 2

• A scale overlay is output at

the right and lower center of

the image at 5mm intervals.

Grid

• A 50mm square grid overlay

is overlaid on the image.

Содержание 0862









































































































































































































Результаты поиска

Содержание 0862

Отзывы:

Konica Minolta 0862, Руководство по эксплуатации, Страница: 124 / 200

Результаты поиска

Содержание 0862

Отзывы: