Konica Minolta 0862, Руководство по эксплуатации, Страница: 15 / 200

Ch.1 Safety Precautions & Warnings
< 13 >
REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2
CE Marking and European Union Compliance
Products intended for sale within the European Union are marked with the CE
Mark which indicates compliance to applicable Directives and European Norms
(EN), as follows.
Amendments to these Directives or ENs are included:
Applicable Directives
• Electromagnetic Compatibility Directive 89/336/EEC
• Low Voltage Directive 73/23/EEC
Applicable Standards
• EN 55022:1998, Limits and Methods of Measurement of Radio Disturbance
Characteristics of Information Technology Equipment
• EN 55024:1998; Information Technology equipment -Immunity characteristics - Limits
and methods of measurement
• IEC 1000-4-2:1995; Electromagnetic compatibility(EMC); Part 4:Testing and measure-
ment techniques;Section 4.2:Electrostatic discharge immunity test
• IEC 1000-4-3:1997; Electromagnetic Compatibility(EMC); Part 4:Testing and mea-
surement techniques;Section 3. Radiated, radio frequency, electromagnetic field
immunity test.
• IEC 1000-4-4:1995; Electromagnetic compatibility(EMC); Part 4: Testing and mea-
surement techniques;Section 4:Testing electrical fast transient,/Burst immunity.
• IEC1000-4-5:1995; Electromagnetic compatibility(EMC), Part 4: Testing and measure-
ment techniques;Section 5: Surge Immunity
• IEC 1000-4-6:1996; Electromagnetic compatibility(EMC), Part 4:Testing and measure-
ment techniques;Section 6: Immunity to conducted disturbances, induced by radio fre-
quency fields.
• IEC 1000-4-11:1994; Electromagnetic compatibility(EMC), Part 4: Testing and mea-
surement techniques;Section 11: Voltage Dips, Short Interruptions, and Voltage
Variations.
• EN 60 950 + A1+A2+A3+A4+A11 - Safety of Information Technology Equipment
Including Electrical Business Equipment
• EN 60 825-1 (EN 60 825) - Safety of Devices Containing Lasers
Laser Devices
Symbol products using lasers comply with US 21CFR1040.10, and IEC825-1:1993,
EN60825-1:1994+A11:1996. The laser classification is marked on one of the labels on the
product.
Caution: Use of controls, adjustments or performance of procedures other than those
specified herein may result in hazardous laser light exposure.
Class 2 laser scanners use a low power, visible light diode. As with any very bright light
source, such as the sun, the user should avoid staring directly into the light beam.
Momentary exposure to a Class 2 laser is not known to be harmful.
NOTE : If the contents of this page are not legible, order a new manual.