Konica Minolta 0862, Руководство по эксплуатации, Страница: 47 / 200

Ch.3 Sequence of Examination
< 45 >
REGIUS Console CS-3 OPERATION MANUAL Ver. 1.10 2005.2
The detailed data settings ("Image Processing",
"Print Format" and "Overlay") cannot be modified
once the order is reserved in the step
1
.
Touch the image display field to change it after the
reading is completed or the reading reservation is
canceled.
The procedure for image output per order with the examination check screen in single-image format is
described below.
Image Output
[Single-Image Format/Output per Order]
In cases where there is an automatic confirmation function, after a certain time has elapsed from reading the
image, the confirmation process will be judged to be completed and the image will be output.
1
Touch the order to be output on the order list.
• The selected order will be displayed in a green
frame.
2
Touch the [OK] button.
• Image output will be initiated and small printer and
host icons will be displayed at the top left of the
image display field.
• Upon initialization of image output, the icons will
change from white to green.
• After completion of output to each device, the
icons will disappear.
3
Repeat steps
1
and
2
to output all the images.
4
Touch the [Complete] button.
• The display changes to the examination search
screen or examination list screen.
When outputting the image again even after the examination is completed, or out-
putting the image more than once, the second or later image will be output through
the "Image Reference Screen".
p.81 Examination
Check
Screen
[Single-Image
Screen]
Images may be output
one at a time upon
completion of each
image reading opera-
tion, or in batch mode
upon completion of the
reading operation for all
orders.
p.46
Image Output
[Single-Image
Format/Batch Mode
Output of all Orders]
: Printer Output
Queue
: Host Output
Queue
Green: Outputting
White: Awaiting output
p.61
Image Reference
after Examination
(Output Again)
Depending on the set up at the time of installation,
either of the icons shown in the right may be printed on
the edge of output film(image data when output to the
Host), indicating the image is mirrored or not.
: not mirrored
: mirrored
2