Konica Minolta 0676, Руководство по эксплуатации

Страница: 49 / 68

47
REGIUS MODEL 190 OPERATION MANUAL Ver.1.03 2004.12
NOTE:
The number "x" suffixed to "ERASE MODE" in the above list shows the erase mode number.
If "x" is "1" : ERASE MODE 1 QUICK (High-speed erase mode)
If "x" is "2" : ERASE MODE 2 SLOW (Low-speed erase mode)
11
12
13
14
15
16
17
18
19
20
REGIUS MODEL 190
STATUS
No.
ERROR MESSAGE REMEDY
ERASE MODE "x"
NOTE
ERASE MODE "x"
ALIGN CST TO LEFT
ERASE MODE "x" BAD LAMP
ALIGN CST TO LEFT
ERASE MODE "x"
IMPROPER INSERTION
ERASE MODE "x" BAD LAMP
IMPROPER INSERTION
ERASE MODE "x"
CLOSE EJECT SLOT SHUTTER
ERASE MODE "x"
CLOSE EJECT SLOT SHUTTER
ERASE MODE "x"
REMOVE USED CASSETTE
ERASE MODE "x" BAD LAMP
REMOVE USED CASSETTE
ERASE MODE "x"
BAR CODE ERROR
ERASE MODE "x" BAD LAMP
BAR CODE ERROR
Status: ERASE MODE "x"
Align the cassette to be inserted to the left side.
Status: ERASE MODE "x"
The cassette has been inserted abnormally.
Push the "eject" button to remove the cassette.
Status: ERASE MODE "x"
The ejection slot shutter is open. Resolve the cause
and close the shutter.
Status: ERASE MODE "x"
Remove the cassette from the cassette stacker.
Status: ERASE MODE "x"
Insert the cassette again to be erased.
If the message "BAD LAMP CALL SVC" is displayed on the LCD panel, one of the two erasing lamps is
broken. This status, under which the erase time becomes longer, will not effect normal operation of REGIUS
MODEL 190. When both lamps are broken, however, operation of REGIUS MODEL 190 will not be possible.
As a precaution, if the message "BAD LAMP CALL SVC" is displayed, contact your Technical Representative.
p.36 Erasing the
REGIUS Plate