Kongskilde GXS 9005, Руководство оператора

Страница: 10 / 70

1. INTRODUCTION
PIGB-183X 04 GXS 9005 / P 0218
10
SPECIAL SAFETY INSTRUCTIONS
When working with mowers the following special measures should be observed.
1. Use a tractor with a cabin provided with safety glass. Furthermore it is advisable
to protect the glass of the cabin with polycarbonate plates inside or with a close-
meshed net outside. The cabin should be closed when working in the field.
2. Always keep away from the cutting unit when the parts of the machine rotate.
3. When replacing blades it is important to observe the rules in the instruction
manual to fulfil the safety requirements. Always use original spare parts.
4. Before use, check the revolving parts (blades, blade bolts, discs and flow caps).
If parts are damaged (bent or cracked), worn or missing, they should be
replaced immediately.
5. Damaged, worn or missing blades should be replaced in sets in order not to
create an unbalance in the machine.
6. Check canvases and guards regularly. Replace worn or damaged canvases.
7. Canvases and guards secure against ejection of stones and foreign matter.
Before use canvases and guards must be placed correctly.
8. Lower the cutting unit to working position before starting the power
transmission.
9. The field should be kept clear of stones and foreign matter, if possible.
10. Even if the machine is adjusted and operated correctly, stones and foreign
matter in the field can be ejected from the cutting unit. Therefore no persons
should stand near the cutting unit where the conditions are unknown. Be
particularly careful when working along public roads or facilities (schools, parks
etc.)
11. Though it is possible, you should never reverse with the cutting unit in working
position. The correct movement for the cutting unit only works when driving
forward, as there is a risk of damage if driving backwards with the machine in
working position.
12. Even though the power transmission has stopped, the revolving parts have a
momentum. Therefore, always wait until the revolving parts have come to a
complete stop before getting near the cutting unit.
13. If in doubt, always contact the nearest dealer.