Setting-Up
20220752H
33
Screen 1
ILLUM. BANK [bAn.1]
The display reads
bAn.0
–
bAn.2
The IS15 instrument system can have two separate banks of
instruments. Setting the lighting level on one display will set all
the other displays in that bank to the same level, but will not
effect any displays in the other bank. For instance, the lighting
level can be independently controlled for:
•
The cockpit and chart table displays of a yacht.
•
The cockpit and mast displays of a yacht.
•
The cabin and flybridge of a power boat.
Note !
You can also have individual lighting on all instruments. Then the
illumination bank setting must be 0.
To select the illumination bank that the particular instrument
shall be allocated to, use the above procedure.
Screen 2
WIND SPEED UNIT SELECTION [SPd1]
The display reads
SPd1
–
SPd4
with both arrows lit on top.
Displayed wind speed units may be set to Knots, Metres Per
Second, Beaufort or Kmh (shown in the LCD display as SPd1,
SPd2, SPd3 or SPd4).
To select the Wind Speed Unit, use the above procedure.
The different speed units are selected according to the table
below.
'SPd1' = Knots
'SPd2' = Metres Per Second
'SPd3' = Kmh
'SPd4' = Beaufort
Screen 3
VMG TO WIND UNIT SELECTION [SPd1]
Note !
This is the same unit as boat speed unit.
The display reads
SPd1
–
SPd3
with the centre arrows lit on top.
