Kongsberg HPR 400, Руководство по установке

Страница: 20 / 26

HPR 400 Transceiver Unit
16
130314 / F
Analogue I/O
The “Analogue” socket is a 25-pin delta connector. It is located
on the rear panel of the HPR 400 Transceiver Unit, and is
identified with the label “ANALOG IO/”. The pins are allocated
as follows:
10 Analogue ground
11 Roll
12 Pitch
22 +15 Vdc
23 -15 Vdc
24 Common
The remaining pins are not used.
( CD 19 18 )
1 1 3
1 4 2 5
Figure 3 25-pin Delta connector, seen from
the outside, looking at the rear of the unit
Gyro/syncro
The “Gyro / synchro” socket is a 15-pin delta connector. It is
located on the rear panel of the HPR 400 Transceiver Unit, and
identified with the label “GYRO”. The pins are allocated as
follows:
1 S
1
2 S
2
3 S
3
9 R
H
10 R
L
( CD 19 20 )
1 8
9 1 5
Figure 4 15-pin Delta connector, seen from the
outside, looking at the rear of the unit