Kongsberg ACS500, Инструкция по эксплуатации

Страница: 52 / 148

Kongsberg ACS500
Emergency sequence
The emergency sequence is a redundant operator function for emergencies. With two
hands on two buttons you close the predefined valves. The emergency sequence must be
predefined in the system to work. See your Registration form for your settings.
The emergency sequence only works from the ACU30, not from HiPAP or HPR.
Purpose
This procedure explains how to perform an emergency sequence, if an emergency
sequence is configured. This is a predefined sequence that can be performed in the
event of Windows not working.
Procedure
1 Unscrew the button on the emergency button cover,
E
.
2 Observe the LEDs inside, if the
Run
LED is red you have an error. The emergency
system is not available, try restarting the system. The
Finished
LED will be green
for 15 sec. When both LEDs are off, continue.
3 Press
Emergency
,
E
and
Execute
,
F
simultaneously for five seconds to start the
emergency sequence.
If the buttons are released within five seconds, the sequence is not started.
4 When the LEDs are green, the predefined sequence is executed.
Operating ACS500 from HiPAP (optional)
Purpose
This procedure explains how to operate ACS500 from HiPAP.
50
397128/C