Kongsberg ACS500, Инструкция по эксплуатации

Страница: 49 / 148

Operational procedures
3
Tap
Set
to confirm the setting.
Setting the telemetry power level for the Subsea Control Unit
Purpose
This procedure explains how to change the power level for the SCU.
Procedure
In some cases lower power level may be a better option due to the current available
acoustic conditions.
1 Select the tab for the SCU you want to change the power level on.
2 In the
Subsea Telemetry Power
section, use the arrows to change the power setting.
3 Tap
Set
to confirm the setting.
4 A telemetry dialogue will come up and show if the power level is changed.
Changing between Cymbal and FSK
Purpose
This procedure explains how to change the acoustic mode used.
Procedure
1
Select the
System configuration
tab.
2
In the
Acoustic Protocol
section, select the SCU you want to change.
3 In the
Acoustic Protocol
section, tap the acoustic mode you want.
4
Confirm the message you receive for the change to take place.
397128/C
47